Grain Products and Mixed Fodder’s

ISSN-print: 2313-478X
ISSN-online: 2411-3921
ISO: 26324:2012



V. Petrov
A. Zhdanov
R. Mazej


The paper considers various designs of aggregated complexes for the processing of rice grain. Their technological schemes were built and analyzed, and a breakdown into modules was performed. This allowed us to group the various designs of units and summarize their technological capabilities. The general reduced technological scheme of rice grain processing is considered. The noted variations are as far as practical applications with and without a grain cleaning module. Various schemes of hulling of grain and selection of hulled grain from unlulled are presented. The technological schemes with various hulling machines are analyzed (the Engleberg hulling machine, with rubberized rolls, centrifugal action), which have their own characteristics. The differences in the use of paddy machines and trimers for sorting grain after hulling are considered. The cylindrical trieurs used to select the rice kernel have an original technological scheme (company Yanmar). This allows you to simplify technological communications and make the unit more compact. The units use more compact paddy machines (reduced size, number of tiers, etc.), which, of course, affects their performance. The most common combined machine with a single-pass technological scheme (which was named after the first inventor and manufacturer, a hulling machine from Satake) is considered. In addition to laboratory equipment, centrifugal hulling machines are used in grain processing units, which gives additional advantages (a more compact scheme, due to the combination of several technological operations, hulling, transporting the grain stream, and air separation. For the majority of broken and unbroken grains sieve separators are used for simple circuits. Separators with vertical rotation axis, that allows to transport the rice to a predetermined height. This makes it possible to link this separator, for example with electronic scales.

Ключові слова:
каменевідбірник,, сепаратор,, лущильна машина,, шліфувальна машина,, полірувальна машина.


Як цитувати
Petrov, V., Zhdanov, A., & Mazej, R. (2020). АГРЕГАТОВАНІ КОМПЛЕКСИ ДЛЯ ПЕРЕРОБКИ ЗЕРНА РИСА. Grain Products and Mixed Fodder’s, 20(2), 41-46.


1. Afzalinia, S., Shaker, M. and Zare, E. 2004. Comparison of different rice milling methods. Canadian Biosystems Engineering/Le génie des biosystèmes au Canada 46: pp. 3.63- 3.66.
2. P.C. Correa, F. Schwanz da Silva, C. Jaren, P.C. Afonso Junior, I. Arana, Physical and mechanical properties in rice processing. Journal of Food Engineering 79 (2007), pp. 137–142.
3. Poonam Dhankhar. Rice Milling. Journal of Engineering. Vol. 04, Issue 05 (May. 2014), ||V4||, pp. 34-42.
4. Mr.R. Narasimhan, Dr. K.R.Vijayakumar, Analysis of Rice Polisher Machine to Control the Rice Feed Fill Percentage. International Journal of Engineering and Technology. Vol 9 No 6 Dec 2017-Jan 2018. pp. 4496-4500.
5. Prospectus. [Online]. Available: list. html?parentCategory=RiceMilling (date of the application: 13.01.2020).
6. Prospectus. [Online]. Available: technology/technicalreview/#t=2&category=agridate of the application: 12.01.2020).